Instructions for Use
1. BEFORE USE:
• Shake Well.
• Ensure stainless steel surface is completely dry. (Fig. 1).
2. APPLICATION:
• Use a microfibre cloth, microfibre pad or non-abrasive cloth.
• Wet the cloth or pad with a small amount of Marine Stainless 2 in 1 and polish onto the surface.
• For heavily stained surfaces, vigorous hand polishing will not damage the surface.
• Evenly treat small areas at a time.
• Once complete, a white film will then appear. (Fig. 2).
• Remove residue with a wet cloth or rinse off thoroughly with fresh water.
• The stainless steel surface should have a polished appearance when complete. (Fig. 3).
• Repeat the application process if tea-staining is still present in certain areas.
3. CURING:
Marine Stainless 2 in 1 is water/corrosion resistant almost immediately after application, reaching
optimum protective effect within 12 hours.
4. MAINTENANCE:
• Wipe the surface occasionally with a clean wet cloth or rinse with fresh water.
• Marine Stainless 2 in 1 can be easily re-applied by following the initial application steps.
Material Safety Data Sheet
